Furuno FR-8062 User Manual

3. ARP OPERATION
3-2
3.2 Controls for Use with ARP
ENTER: Acquire cursor-selected target; displays data for tracked target (in the data box at the
bottom of the screen).
CANCEL/HL OFF: Remove data of cursor-selected tracked target from the data box; stops
tracking cursor-selected target (when its data is not displayed in the data box).
MENU: Access the Target and ARP menus for ARP operations.
Trackball: Choose target to acquire, cancel tracking or show target data.
3.3 ARP Display On/Off
You may turn off the ARP display as shown below.
1. Press the MENU key to display the main menu.
2. Use the trackball to choose ARP and press the ENTER key.
ARP menu
3. Use the trackball to choose Display and press the ENTER key.
4. Choose Off or On as appropriate and press the ENTER key.
5. Press the MENU key to close the menu.
Brill/Color
Echo
Mark
Target Trails
Custom 1
Display
Custom 2
Custom 3
Tuning
Menu
ARP
System
Display : Off
Symbol Color : Green
Auto Acquire : Off
All Cancel
[ENTER]: Enter [CANCEL/HL OFF]: Back
[MENU]: Exit
GPS
Target
ARP
AIS
GPS Buoy
Off
On

Furuno FR-8062 Specifications

General

Brand	Furuno
Model	FR-8062
Category	Marine Radar
Language	English