1. OPERATION
1-
Data display
Refer to Chapter for user-defined window
setting. The OOM icon can be displayed by
pressing the CSO ONO key.
SEP 12, 2005 23:59'59" U
12° 23.456' N
123° 23.456' E
POSITION
RNG
31.23
nm
SOG
12.3
kt
BRG
223.4°
COG
123.4°
TO : 001
MARINE
POINT1
NEXT : 002
MARINE
POINT2
Position in latitude and
U: UTC
J: JST
S: Ship's time
longitude or LOPs
Fixing date and time*
User-defined
display window
User-defined
display data #1
User-defined
display data #4
User-defined
display data #3
User-defined
display data #2
Current destination waypoint
Next destination waypoint
W84
D3D 100m
SAFE
Zoom icon
Figure 1-11 Data display mode
*: "- -" appears until calculating position after
turning on the power. If fixing error occurs
this indication stops.
1. Icons
arious icons appear on the left-hand side of
display to alert you to equipment status.
: position offset applied.
: Track recording is suspended.
: Alarm is violated.
: North mark.
: Demonstration display.
To Next Page
Loading...
Need help?
General
