Furuno GP-150 User Manual

6. SETTING UP VARIOUS DISPLAYS
6-3
Registering waypoints using LOPs
1) Press WPT RTE and 5.
2) Press
to display LOPs.
WAYPOINT LIST (LOP, LC)
001 36365.2 59102.3
MARINE POINT AUG12’ 95 12 : 35U
001
002 36512.3 59134.5
___ A POINT AUG13’ 95 13 : 45U
MENU : Escape
: L/L LOP
: Edit
ENT : Enter
003 _ _ _ _ _ , _ _ _ _ _ _ , _
___ _ _ _ _ _ _ _ _ _ _ _ _
004 _ _ _ _ _ , _ _ _ _ _ _ , _
___ _ _ _ _ _ _ _ _ _ _ _ _
Figure 6-4 LOP display on the waypoint list
3) Press
or to select waypoint
number.
4) Press
or . Your display should look
like one of the displays in Figure 6-5.
LC8930 : 30 50
3 8931.2 58654.3
(34q 12.345’ N 130q 23.456’ E)
Mark :
Cmnt : MARINE POINT
Edit=Waypoint : 001
ENT : Enter
: Cursor
MENU : Escape
3
: Column
DE : 32 (9C) RED GREEN
1 A:12.23 2H:24.35
(34q 12.345’ N 130q 23.456’ E)
Mark :
Cmnt : MARINE POINT
Edit=Waypoint : 001
ENT : Enter
: Cursor
MENU : Escape
1
: Column
ABCDEFGHIJ 1, 2 ~ 9, 0
Loran C LOP input screen
Decca LOP input screen
Figure 6-5 LOP input screens
5) Key in LOP1 and LOP2, to enable
calculation.
6) Press
to calculate LOPs. "Calculating"
appears between parentheses during the
calculation. Actual LOPs replace
"Calculating" upon completion of the
calculation.
If the conversion fails, the message
"Failed in Conversion" appears for three
seconds.
Press the CLEAR key and reenter the
right LOP1 and LOP2.
7) Press
or to select mark.
8) Press the NU/CU ENT key.
9) Enter comment, if desired.
10) Press the NU/CU ENT key twice.
Waypoint data and date and time
registered appear.

Furuno GP-150 Specifications

General

Display Type	LCD
Display Size	4.5 inches
Resolution	320 x 240 pixels
Channels	12
Operating Temperature	-15°C to +55°C
Waterproof Rating	IPX5
Data Output	NMEA 0183
Type	GPS Receiver
Accuracy	10 meters
Languages	English