7-2
7.2 Navigating to Waypoints
(waypoint list)
1. Press the [WPT/RTE] key to open the WPT
& ROUTE menu.
2. Press the WAYPOINTS soft key to open
the WPT menu.
3. Press the LOCAL LIST or
ALPHA/NUMERIC LIST soft key to show
corresponding waypoint list.
4. Select a waypoint.
5. Press the GO TO soft key. The plotter
display appears. A line runs between
destination selected and own ship’s
position. Arrows on the line show the
direction to the follow. Waypoint data
appear at the top of screen.
7.3 Navigating to Ports, Port
Services
Some Nav-Charts
TM
mini chart cards have a
port service list which shows services available
at ports or harbors. (See page 2-4.) You can
use the list to set destination as follows:
1. Press the [MENU] key to open the main
menu.
2. Press the DISPLAY OPTIONS soft key.
3. Press ▲ to select SET GO TO METHOD
and press the EDIT soft key. The SET GO
TO METHOD window appears.
4. Press the ▲ or ▼ to select WPT/PORT
SER and press the [ENTER] key or the
ENTER soft key.
5. Press the [PLOT] key to return to the
plotter display.
6. Press the GO TO. Soft key Soft key titles
change as in the figure at the top of the
right column.
GPS 3D
CANCEL
GO TO
FROM
OS
0.26 nm
180.2°
QUICK
ROUTE
NEAR
SRVICE
PORT
GO TO
PUNTA CORNACCHIA
ACCO AMENO
I. ISCHIA
CASAMICCIOLA
ISCHIA PORTO
40°45.971'N
13°57.462'E
+
Plotter display
7. Press the PORT or NEAR SRVICE soft key
depending on objective. PORT shows a list
of ports in your area. NEAR SRVICE
displays the port service list.
SELECT PORT
ACCIAROLI
ACQUAMORTA
AGNONE S. NICOLA
AGROPOLI
AMALFI
BAIA
CAPRI
CASA MICCIOLA-ISCHIA
▼
Select port window (ex. southern Italy)
To Next Page
Loading...
Need help?
General
