FUXTEC FX-MS125 User Manual

Original Bedienungsanleitung FUXTEC FX-MS125_de_en_fr_ita_es_rev01
48
26. Putting on the shoulder harness
Important: The shoulder strap is an optional accessory from FUXTEC, which we
recommend for use with any brush cutter job. You can find the shoulder strap at
www.fuxtec.de via the following item number: FX-PS152TG
The shoulder strap is equipped with a quick-
release device (see picture). You can quickly
remove the shoulder strap by pulling on the
quick-release device.
Read the manual carefully. Be thoroughly
familiar with the control and correct use of the
device. Understand how to stop and shut
down the device. Understand how to release a
clamped attachment quickly.
Do not allow anyone to enter the DANGER ZONE while working. The DANGER ZONE is an
area of 15 meters in radius (approximately 16 steps). Insist that people in the DANGER
ZONE wear eye protection against flinging objects. If the device must be used where
people are unprotected, work at a low, reduced speed to reduce the risk of skidding.

FUXTEC FX-MS125 Specifications

General

Brand	FUXTEC
Model	FX-MS125
Category	Trimmer
Language	English