10 - English
2. PRESENTATION
2. Presentation
This chapter contains information that is important to
be aware of when planning the installation.
An installation of GARDENA R40Li includes four main
components:
• R40Li, a robotic lawn mower that mows the lawn
by essentially operating in a random pattern. The
mower is powered by a maintenance-free
battery. The mower is powered by a
maintenance-free battery.
• Charging station, where your R40Li returns when
the charge level in the battery becomes too low.
The charging station has three functions:
• To send control signals along the boundary
wire.
• Sending control signals in the guide wire so
that R40Lican find the charging station.
• To charge R40Li battery.
• Transformer, which is connected between the
charging station and a 230V wall socket. The
transformer is connected to the wall socket and
to the charging station using a 10 m long low
voltage cable. The low voltage cable must not be
shortened or extended.
• Wire, laid in a loop around R40Li working area.
The boundary wire is laid around the edges of
the lawn and around objects and plants that the
mower must not run into. The wire is also used
as the guide wire.
The wire supplied with the installation is 150 m
long. If this is not sufficient more wire can be
purchased, with a connector, and spliced onto
the existing wire.
The maximum permitted length for the loop wire
is 250 m.
To Next Page
Loading...
Need help?
General
