1. Press
MAP
.
2. Turn the
Small
knob to adjust the map scale.
3. Turn the
Large
knob to view the other Map function displays.
Map and Nav
Info
The Map and Nav Info page of the Map function provides a split screen showing the
moving map and selected navigation information. The navigation information provided on
the right side of the display includes: the current TO waypoint identifier, distance and
bearing to the TO waypoint from your current position, ground speed, aircraft current
track, and the map scale.
Map Setup The map setup functions are provided on three pages. The map setup function allows you
to select the route line, map orientation, map scale for viewing identifiers, waypoint types
that will be displayed, airspace type, and special use airspaces.
Route Line
A Route Line can be drawn for the current and next leg of the active route when the
selection is turned on.
1. In the Map function, turn the Large knob to reach the Map Setup page. Press SEL to
start selection of the Route Line. The Route Line selection will flash.
Route Line:On
Map Orient:North
2. Turn the Small knob to choose On or Off.
3. Press ENTER when you made your selection, or turn the Large knob to the next item.
Map Orient
The Map Orient selection allows you to choose how the top of the map display is
oriented.
North Up - The display is oriented so that vertical lines on the map are aligned with
magnetic north. The aircraft symbol is centered in the display and will point towards
the direction you are flying.
Moving Map Functions
26
To Next Page
Loading...
Need help?
General