4
If necessary, select an option:
• To add more shaping points to the route, select additional
locations on the map.
• To remove a shaping point, select .
5
When you are finished shaping the route, select Go!.
Taking a Detour
Before you can take a detour, you must be navigating a route
and you must add the change route tool to the map tools menu
(Enabling Map Tools, page 10).
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads, or poor road conditions.
1
From the map, select > Change Route.
2
Select an option:
• To detour your route for a specific distance, select Detour
by Distance.
• To detour around a specific road on the route, select
Detour by Road.
Stopping the Route
From the map, select > Stop.
Changing the Route Calculation Mode
1
Select Settings > Navigation > Calculation Mode.
2
Select an option:
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Off Road to calculate point-to-point routes (without
roads).
• Select Less Fuel to calculate routes that are more fuel-
efficient.
NOTE: This feature is available only when you are using
the car vehicle profile.
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
Starting a Route by Using the Map
You can start route by selecting a location from the map.
1
Select View Map.
2
Drag and zoom the map to display the area to search.
3
If necessary, select to filter the displayed points of interest
by category.
Location markers ( or a blue dot) appear on the map.
4
Select an option:
• Select a location marker.
• Select a point, such as a street, intersection, or address
location.
5
Select Go!.
Previewing Multiple Routes
1
Search for a location (Finding a Location by Category,
page 7).
2
From the search results, select a location.
3
Select Routes.
4
Select a route.
Trip Planner
You can use the trip planner to create and save a trip, which you
can navigate later. This can be useful for planning a delivery
route, a vacation, or a road trip. You can edit a saved trip to
further customize it, including reordering locations, optimizing
the order of stops, adding scheduling information, and adding
shaping points.
You can also use the trip planner to edit and save your active
route.
Planning a Trip
A trip can include many locations, and it must include at least a
starting point and a destination. The starting location is the
location from which you plan to start your trip. If you start
navigating the trip from a different location, the device gives you
the option to route to your starting location first. The destination
is the final location in the trip. For a round trip, the starting
location and destination can be the same. You can also include
additional locations, or stops, between your starting location and
your destination.
1
Select Apps > Trip Planner > > Create Trip.
2
Select Select Start Location.
3
Select a location for your starting point, and select Select.
4
Select Select Destination.
5
Select a location for your destination, and select Select.
6
If necessary, select Add Location to add additional
locations.
7
After you have added all the necessary locations, select Next
> Save.
8
Enter a name, and select Done.
Navigating to a Saved Trip
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select Go!.
4
Select your next destination, and select Start.
Optimizing the Order of Stops in a Trip
The device can automatically optimize the order of locations in
your trip to create a shorter, more efficient route. The starting
point and destination are not changed when you optimize the
order.
While editing a trip, select > Optimize Order.
Editing and Reordering Locations in a Trip
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select a location.
4
Select an option:
• To move the location up or down, select , and drag the
location to a new position in the trip.
• To add a new location after the selected location, select
.
• To remove the location, select .
Editing and Saving Your Active Route
If a route is active, you can use the trip planner to edit and save
your route as a trip.
1
Select Apps > Trip Planner > My Active Route.
2
Edit your route using any of the trip planner features.
The route recalculates each time you make a change.
3
Select Save to save your route as a trip, which you can
navigate again later (optional).
Changing Trip Routing Options
You can change routing options to change how routes for your
trip are calculated.
1
Select Apps > Trip Planner.
2
Select a saved trip.
Navigating to Your Destination 5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
