Garmin GPSMAP 76CS User Manual

27
GPSmap 76CS
GPS Navigation
The Mark Waypoint Page
The Mark Waypoint Page allows you to mark and record your current
(or any other) location as a waypoint and appears with name for that
waypoint and a waypoint symbol. You can mark your current location
from any page on the GPSmap 76CS.
To mark your current location as a waypoint:
1. Press in and hold the ENTER/MARK key until the Mark
Waypoint Page appears.
2. To change the name of the waypoint, use the ROCKER key to
highlight the waypoint name fi eld and press ENTER to display
the on-screen keypad. Use the ROCKER key and ENTER key
to select a name for the waypoint. If you choose a name that
has already been used, a “Waypoint Already Exits” message
will appear. Press ENTER to acknowledge and choose a new
name.
3. To assign an identifying symbol to a waypoint, use the
ROCKER key to highlight the symbol block next to the
waypoint name and press ENTER to display the Symbols Chart.
4. To save the waypoint to the Find Menu Waypoints List, high-
light “OK” and press ENTER.
5. If you do not want to save it as a new waypoint, press the
QUIT button before pressing any other to cancel.
MARK
Using Waypoints
ENTER
Mark Waypoint Page
Naming a Waypoint
Symbols Chart
Press the
ENTER/MARK
key to display
the Mark
Waypoint
Page
GPSmap 76CS Owner's Guide copy.indd 27 3/30/2004, 1:58:33 PM

Garmin GPSMAP 76CS Specifications

General

Sport (fitness, running)	No
Marine (chartplotters, sounders)	Yes
Routes quantity	50
Number of waypoints	1000
Form factor	Handheld
Display resolution	160 x 240 pixels
Display number of colors	262144 colors
Display size (HxV) (imperial)	1.5 x 2.2 \
Battery type	AA
Battery life (max)	20 h
Number of batteries supported	2

Weight and Dimensions

Depth	35 mm
Width	69 mm
Height	157 mm
Weight	212 g