Navigating to a Saved Trip
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select Go!.
4
Select your next destination, and select Start.
Optimizing the Order of Stops in a Trip
The device can automatically optimize the order of locations in
your trip to create a shorter, more efficient route. The starting
point and destination are not changed when you optimize the
order.
While editing a trip, select > Optimize Order.
Editing and Reordering Locations in a Trip
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select a location.
4
Select an option:
• To move the location up or down, select , and drag the
location to a new position in the trip.
• To add a new location after the selected location, select
.
• To remove the location, select .
Editing and Saving Your Active Route
If a route is active, you can use the trip planner to edit and save
your route as a trip.
1
Select Apps > Trip Planner > My Active Route.
2
Edit your route using any of the trip planner features.
The route recalculates each time you make a change.
3
Select Save to save your route as a trip, which you can
navigate again later (optional).
Changing Trip Routing Options
You can change routing options to change how routes for your
trip are calculated.
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select one or more options:
• To change the vehicle profile for the trip, select the vehicle
profile icon.
• To add shaping points to your trip, select > Trip
Settings > Shape Route, and follow the on-screen
instructions (Shaping Your Route).
• To change the calculation mode for the trip, select >
Trip Settings > Route Preference (Changing the Route
Calculation Mode).
Scheduling a Trip
You can add scheduling information to each location in your trip,
including the desired arrival time and layover duration at each
location. This can help you plan your departure to reach
locations in your trip on time.
1
Select Apps > Trip Planner.
2
Select a trip.
3
Select > Trip Settings > Edit Schedule.
4
Select a location, and follow the on-screen instructions to
enter the schedule information.
TIP: If you need to schedule multiple locations in the trip, you
should start from the beginning of the trip and work toward
the end.
5
Repeat step 4 to enter schedule information for additional
locations.
6
When finished, select Save.
When you navigate the trip, you should depart by the time
shown under the starting point to reach your stops and
destinations by the scheduled time. The schedule is an estimate
only. Traffic conditions, construction, and other delays may
affect your actual arrival times.
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature (Device and
Privacy Settings).
Using the myTrends
™
feature, your device predicts your
destination based on your travel history, the day of the week,
and the time of day. After you have driven to a saved location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel, and traffic
information.
Select the navigation bar to view a suggested route to the
location.
Avoiding Delays, Tolls, and Areas
Avoiding Traffic Delays on Your Route
Before you can avoid traffic delays, you must be receiving traffic
information (Receiving Traffic Data Using a Traffic Receiver).
By default, the device optimizes your route to avoid traffic delays
automatically. If you have disabled this option in the traffic
settings (Traffic Settings), you can view and avoid traffic delays
manually.
1
While navigating a route, select > Traffic.
2
Select Alternate Route, if available.
3
Select Go!.
Avoiding Toll Roads
Your device can avoid routing you through areas that require
tolls, such as toll roads, toll bridges, or congestion areas. The
device may still include a toll area in your route if no other
reasonable routes are available.
1
Select Settings > Navigation.
2
Select an option:
NOTE: The menu changes based on your area and the map
data on your device.
• Select Toll Roads.
• Select Tolls and Fees > Toll Roads.
3
Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4
Select Save
Avoiding Toll Stickers
NOTE: This feature is not available in all areas.
The map data on your device may contain detailed toll sticker
information for some countries. You can avoid or allow toll
stickers for each country.
1
Select Settings > Navigation > Tolls and Fees > Toll
Stickers.
2
Select a country.
3
Select an option:
• To be asked each time before routing through a toll area,
select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4
Select Save.
6 Navigating to Your Destination
To Next Page
Loading...
Need help?
General
