Garmin VARIA RCT716 User Manual

Light Network Settings
From the Sensors menu, select Lights, and select a paired light.
Enable: Turns on the light and allows you to control the light remotely with your Edge device. You can disable a
light to disconnect it from the light network.
Light Mode: Turns off the light.
About: Displays device, software, and battery information.
Remove: Allows you to delete a paired light from the network.
Customizing the Radar Alert Settings with Your Edge 1030
Before you can customize the radar alert settings with your Edge device, you must pair the devices.
You can customize how the radar alerts sound and display on your Edge device.
1 From your Edge device, select > Sensors.
2 Select your radar device.
3 Select Sensor Details > Alert Settings.
4 Select an option.
Other Compatible Devices
Pairing the Radar Device with a Compatible Edge Device
This task is for the Edge 1030, 830, and 530 devices. If your device is not listed, go to buy.garmin.com.
1 Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while pairing.
2 Turn on the Edge device.
3 From the Sensors menu, select Add Sensor > Search All.
4 While the Varia RCT716 device is turned off, hold the device button for 2 seconds to enter pairing mode.
The status LED flashes purple, and the tail light turns on. The device is in pairing mode for 5 minutes or until
you press the device button.
5 Select your sensor.
When the sensor is paired with your Edge device, the radar and bike light status icons appear solid.
Pairing the Radar Device with a Compatible Garmin Watch
This task is for the Forerunner
®
945, fēnix
®
7 series, Venu
®
2 series, and vívoactive
®
4 series watches. If your
watch is not listed, go to buy.garmin.com.
NOTE: Not all Varia RCT716 features are available on all compatible watches. See your watch owner's manual.
1 Bring the watch within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while pairing.
2 Turn on the Garmin watch.
3 From the Settings menu, select Sensors > Add New > Search All.
4 While the Varia RCT716 device is turned off, hold the device button for 2 seconds to enter pairing mode.
The status LED flashes purple, and the tail light turns on. The device is in pairing mode for 5 minutes or until
you press the device button.
5 Select your sensor.
When the sensor is paired with your Garmin watch, the radar and bike light status icons appear solid.
Other Compatible Devices 13

Garmin VARIA RCT716 Specifications

General

Brand	Garmin
Model	VARIA RCT716
Category	Radar
Language	English