Introduction
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
The device can improve situational awareness. It is not a replacement for cyclist attentiveness and good
judgement. Always maintain awareness of your surroundings, and operate the bicycle in a safe manner. Failure
to do so could result in serious injury or death.
Always consult your physician before you begin or modify any exercise program.
Getting Started
You can use the Varia RCT716 with your compatible Garmin
®
device or a phone. This list provides an overview of
the installation and setup tasks.
• Charge the device (Charging the Device, page 14).
• Install the tail light mount (Installing the Tail Light Mount, page 3).
• If you are using an Edge
®
1030 series device, pair the devices (The Varia RCT716 and Your Edge 1030 Series,
page 10).
• If you are using your phone, download the Garmin Varia app to your phone, and pair the devices (Pairing the
Varia Radar Device with Your Phone, page 7).
• If you are using another Garmin device, pair the devices (Other Compatible Devices, page 13).
Tips for Installing the Device
The Varia RCT716 device includes a tail light and micro radar that can detect approaching vehicles up to 140
meters away.
• Select a secure location to mount the device where it does not interfere with the safe operation of your bike.
• Mount the device as high on the seat post as possible for optimal light visibility and radar detection.
NOTE: The mount surface should be vertical. The mounts are designed to accommodate most seat post
angles.
• Mount the device on the seat post 250 mm to 1200 mm above the road.
• Mount the Varia RCT716 device parallel to the longitudinal axis of the vehicle.
Introduction 1
To Next Page
Loading...
Need help?
General
