The status LED turns red while charging
• Check the USB cable, connectors, and ports for damage.
• Make sure the power source is generating power.
You can check this several ways. For example, you can check whether other devices powered by the source
are functioning.
• Make sure the device is within the approved charging temperature range (Varia RCT716 Specifications,
page 18).
The status LED turns red while updating the software
• Check the USB cable, connectors, and ports for damage.
• Turn both devices off, and turn them back on.
• Make sure the device is within the approved operating temperature range (Varia RCT716 Specifications,
page 18).
The radar device disconnects from the Edge device
WARNING
If the radar device is not connected or sending radar data, Garmin recommends that you stop riding and check
the devices in a safe location. Failure to do so could result in serious injury or death.
• Turn both devices off, and turn them back on.
• Pair the devices (Pairing the Varia Radar Device with Your Edge 1030, page 10).
The Varia RCT716 device sends light and radar data to the Edge device. The Edge device displays and
when connected.
The radar device disconnects from the Varia app
WARNING
If the radar device is not connected or sending radar data, Garmin recommends that you stop riding and check
the devices in a safe location. Failure to do so could result in serious injury or death.
• Turn off Bluetooth technology from your phone settings, and turn it back on.
• Turn off both devices, and turn them back on.
The Varia RCT716 device sends light and radar data to the Varia app. The Varia app displays when
connected.
Replacement Parts
Replacement parts are available for this device. Contact your Garmin dealer or go to garmin.com for more
information.
Getting More Information
• Go to support.garmin.com for additional manuals, articles, and software updates.
• Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and
replacement parts.
20 Troubleshooting