Remote Control Buttons
When operating the remote, point it directly at the front of the "IV.
Objects between the remote and the remote sensor can block the signal to
the "IV.
POWER Button Press to turn the "iV on or off.
PREV CH Button (Previous Channel) Pressing this button switches the
"IV back to the last tuned channel. This is useful if you want to watch two
channels. Select the first channel you wish to watch. Then select the other
channel by pressing two number buttons. The "IV changes back and forth
between the two channels each time you press this button.
DISPLAY Button Press to display the time and channel number on the
screen. Press to see if the Sleep 1]mer, Alarm "rimer, and Closed Captioning
are set. Press to quickly remove menus from the screen unless otherwise
noted within the menu.
MUTE Button Press to quickly reduce sound to minimum level. Closed
captioning (C1) may appear on the screen when you press MUTE. To
restore sound and normal picture, press MUTE again or press VOL up.
CHAN ^Iv Buttons (Channel Up and Down) Press to select the next
higher or lower channel in memory. You can add or erase channels in
memory as desired. Details are on page 10. When a menu is displayed,
CHAN ^/vallows you to select and adjust menu controls.
VOL Buttons (Volume Up and Down) (Also - and + Buttons) Press
VOL + to increase volume, or press VOL - to decrease volume. The volume
display appears on the screen when you press the VOL buttons. When a
menu is displayed, press + or- to adjust the setting of an item that is
highlighted in a menu.
MENU Button Brings up the Main menu. When in the menu system, it
selects highlighted items. Also returns you to the previous menu.
RESET Button Press to return all video settings (color, tint, contrast,
brightness, and sharpness) back to the original settings.
CLEAR Button Press to clear the screen of all on-screen displays.
Number Buttons (0.9) Press to directly access any channel number. To
select a channel, press two number buttons. For example, press Othen 6
for channel 6. To select a 3-digit number, press and hold number button 1
until 1- appears on the screen. Then press the other two numbers.
INPUT Button Switches the TV to channel 3. This is useful if you have a
VCR connected to your"iV.
SKIP Button (Commercial Skip) Press to operate Commercial Skip
during "IV viewing.
8
POWER
CHAN
CLEAR MENU RESET
0 IKI
0oo
o0bb
5O5
Point and Select
To use the on-screen menus, you
need to know one rule: point and
select:
• Point to your selection with the
on-screen highlight. (Use the
Vol +/- buttons on your remote
to move left and right; use the
CH A/v buttons to move up and
down.)
• Press the MENU button to select
the highlighted item.
To Next Page
Loading...
Need help?
General
