GE 7 User Manual

9



1. Press the mute/menu OK button. The handset display shows
MUTE ON.
. Press the mute/menu OK button to cancel and return to your phone conversation.

When the handset is  (in TALK mode) you may adjust the receiver volume by
pressing the CALLER ID-VOLUME ( 6 or 5) button. There are ve volume levels to
choose from. When the maximum or minimum volume level is reached, the phone
beeps twice. VOL 1 is minimum and VOL 5 is maximum.

This feature allows you to turn off all the handset ringer(s) at once, by pressing one
button at the base unit, even though the ringer volume of handset(s) has been preset.
1. In the standby mode, press the do not disturb button on the base.
. The DND indicator will light and
DO NOT DISTURB shows in each handset display.
. To cancel, press the do not disturb button again.





The intercom feature allows you to have a conversation with another registered
handset without tying up the telephone line, allowing you to still receive incoming
calls.

1. Make sure the handset is (not in TALK mode).
. Press the delete/intercom/conf button on the handset.
. Use the touch-tone pad to select the handset you want to page.



GE 7 Specifications

General

Brand	GE
Model	7
Category	Handsets
Language	English