7
When the answering system memory is full, the system answers after 10 rings. You
should erase some messages so the answering system may record new messages.
You may erase messages in the following three ways:
1. Press and release PLAY/STOP button.
. Press the repeat and skip buttons to select and play the message you want to
erase.
. Press the delete button, the current message is erased, and the next
message plays.
1. Make sure the phone is
(not in TALK mode)
. Press and hold the delete button until “
ALL OLD MESSAGES ERASED” is
announced.
1. Press the mute/menu OK button to go to the main menu.
. Press the CALLER ID-VOLUME (
6 or 5) button to scroll to ANSWERER.
. Press the mute/menu OK button to enter the menu, press the CALLER ID-VOLUME (
6 or 5) to select submenu.
. Press the mute/menu OK button to access the answering system.
ANSWERER
REMOTE ACCESS shows on the display.
5.
Press the play/stop (key ) on the handset.
6. Press the erase (key 0) on the handset to erase a message during playback.
To Next Page
Loading...
Need help?
General
