ge_com
Oven Vent
On glass cooktop models,the ovenisvented
through an opening at the rear of the
cooktop.
On coil cooktop models,the oven isvented
through an opening under the right rear
surface unit.
Never cover the opening with aluminum foil
or any other material
Pointed Surfaces tonsomemodels)
Painted surfaces includethe sides of the
range and the sidesof the door trim.
To cleanthe painted surfaces, usea hot,
damp cloth with a mild detergent suitable for
these surfaces.Usea clean, hot, damp cloth
to remove soap. Drg with a drg, clean cloth.
Donot use steel-wood pads,commercial
oven cleaners,cleaning powders or other
abrasive cleaners.They will damage the
surface.
Stainless Steel Surfaces (onsome models)
Do not use u steel wool pad; ff will scratch
the surface.
Tocleanthe stainlesssteel surface, use
warm sudsywater or a stainlesssteel
cleaner or polish.Alwags wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainlesssteel surface.
To inquire about purchasing stainlesssteel
appliance cleaner or polish,or to find the
location of a dealer nearest you, pleasecall
our toll-free number:
Notional Parts Center 800.626.2002
ge.com
Gloss Window (on some models)
To clean the outside glass finish, use a glass
cleaner Rinse and polish with a drg cloth.
31
To Next Page
Loading...
Need help?
General
