Installation Instructions
OUTSIDE TOP EXHAUST (Vertical Duct)
INSTALLATION OVERVIEW
A1. Attach Mounting Plate to Wall
A2. Piepa_e Top Cabinet
A3. Check Dampe_ Opeiation
A4. Mount Mic_owave Oven
A5. Adjust Exhaust Adaptor
A6. Connect Ductwo_k
|
I
I
I-_ ATTACH THE MOUNTING
PLATE TO THE WALL
===m
Attach the plate to the wall using toggle bolts.
At least one wood sciew illust be used to attach
the plate to a wall stud.
[]Remove the toggle wings flom the bolts.
[] Inse_t the bolts into the moundng plate
th_ough the holes designated to go into d_)_,vall
and _eatmch the toggle wings to :_" onto each bolt.
To use toggle bolts:
Spacingfor Toggles
MoreThanWall
+l_,.[_,_Th ickness
ToggleWings
Mounting
Plate_.
BoltEnd
_ Place the mounting plate against the wall and
inse_t the toggle wings into the holes in the wall
to mount the plate.
NOTE: Befo_e tightening toggle bolts and wood
sc_ew, make sme the robs on the mounting plate
touch the bottom of the cabinet when pushed
flush against the wall and that the plate is p_ope_ly
cente_ed under the cabinet.
CAUTION: Be ca_eflll to avoid pinching fingeis
between the back of the mounting plate and the wall.
_ Tighten all bolts. Pull the plate away fiom the wall
to help tighten the bolts.
12
To Next Page
Loading...
Need help?
General
