GE JVM6175DF1WW User Manual

Installation Instructions
TOOLS YOU WILL NEED
# 1 and#2Phillipsscrewdriver
Tinsnips(forcutting
damper,if required)
Gloves
Pencil
Scissors
(to cut template,if necessary)
Saw (saber,holeor keyhole)
Ruleror tapemeasureand
t edge
Electricdrill with r_c",W' and%"
drill bits
0
Studfinder or
Hammer(optional)
Carpentersquare
(optional)
Fillerblocksor scrap
woodpieces,if needed
for top cabinetspacing
(usedonrecessedbottom
cabinetinstallationsonly)
Safetygoggles Level
Ductandmaskingtape
MOUNTING SPACE
66" or More
fromthe Floor
tothe Topof
the Microwave
\
BottomEdgeof
CabinetNeedsto
or More
from the Cooking
Surface
;lash
NOTES:
• The space between the cabinets must be
30" wide and flee of obstructions.
• If the space between the cabinets is greater
than 30", a Filler Panel Kit may be used to fill
in the gap between the microwave oven and
the cabinets. Your Owner's Manual contains
the kit number for your model.
• This microwave oven is for installation over
ranges up to 36" wide.
• If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
• When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
• Models with top venting grilles: Do not allow
cabinetry or other objects to block the airflow
of the vent.
7

GE JVM6175DF1WW Specifications

General

Brand	GE
Model	JVM6175DF1WW
Category	Microwave Oven
Language	English