GE LOGIQ F SERIES
DIRECTION 5446617-100, REVISION 10 BASIC SERVICE MANUAL
Section 1-3 - Safety Considerations 1 - 9
1-3-3 Mechanical Safety (cont’d)
NOTE: Special care should be taken when transporting the unit in a vehicle:
• Secure the unit in an upright position.
• Lock the wheels (brake)
1-3-4 Electrical Safety
To minimize shock hazard, the equipment chassis must be connected to an electrical ground. The
system is equipped with a three-conductor AC power cable. This must be plugged into an approved
electrical outlet with safety ground. The power outlet used for this equipment should not be shared with
other types of equipment.
Both the system power cable and the power connector meet international electrical standards.
1-3-5 Label Locations
Refer to LOGIQ F Series User Guide Section Warning Label Location in Safety Chapter.
WARNING
DO NOT SERVICE OR DISASSEMBLE PARTS UNDER FRU UNIT LEVEL AT ANY
CIRCUMSTANCES.
To Next Page
Loading...
Need help?
General
