GE LOGIQ V5 Expert User Manual

Network and Insite II Configuration
LOGIQ V3/V5/V5 Expert – Basic Service Manual 7-29
5726264-100 English Rev.8
7-5 Network and Insite II
Configuration
7-5-1 Network Configuration
7-5-1-1 Wire-LAN Network
1. Connect system with network.
2. Enter Utility-> Connectivity-> TCP/IP, in IP settings
window, check Enable DHCP, and select the proper
network speed in Network Speed.
Figure 7-20. Enable DHCP

GE LOGIQ V5 Expert Specifications

General

Brand	GE
Model	LOGIQ V5 Expert
Category	Medical Equipment
Language	English