QUICK REFERENCE GUIDE
469 MOTOR MANAGEMENT RELAY – QUICK REFERENCE GUIDE 23
9.3 Downloading and saving setpoints files
Setpoints must be saved to a file on the local PC before performing any firmware
upgrades. Saving setpoints is also highly recommended before making any setpoint
changes or creating new setpoint files.
Within the EnerVista 469 Setup window, setpoint files are accessed in the settings List
control bar window or the file window. Use the following procedure to download and save
setpoint files to a local PC.
1. Ensure that the site and corresponding device(s) have been properly defined and
configured as shown in “Connecting to the relay” on page 18.
2. Select the desired device from the site list.
3. Select the File > Read Settings from Device menu item to obtain settings information
from the device.
4. After a few seconds of data retrieval, the EnerVista 469 Setup software will display the
following window, requesting the name and destination path of the setpoint file. The
corresponding file extension will be automatically assigned. Press Save to complete
the process. A new entry will be added to the tree indicating the path and file name.
9.4 Adding setpoints files to the environment
The EnerVista 469 Setup software provides the capability to review and manage a large
group of setpoint files. Use the following procedure to add a new or existing file to the list.
1. In file pane, right click on Files, and select the Add Existing Setting File item as shown:
2. The Open dialog box will appear, prompting the user to select a previously saved
setpoint file. As for any other MS Windows
®
application, browse for the file to be
added, and then click Open. The new file and complete path will be added to the file
list.
To Next Page
Loading...
Need help?
General