13
Step 3 Enter the “Day of Week “
1 = Sunday 3 = Tuesday 5 = Thursday 7 = Saturday
2 = Monday 4 = Wednesday 6 = Friday
Step 4 Enter the “Month Code”. Must always be two (2) digits.
01 = January 05 = May 09 = September
02 = February 06 = June 10 = October
03 = March 07 = July 11 = November
04 = April 08 = August 12 = December
Step 5 Enter the “Day Code”. Must always be two (2) digits.
Example: The 5
th
would be entered as [0]–[5].
Step 6 Enter the last two digits of the “Year Code”.
Example: For 2007 enter [0]–[7].
SETTING THE SYSTEM CLOCK
Step 1 Press [r]-[9]-[7].
Step 2 Enter the “Master Code “.
Step 3 Enter the “hour code” which must be two (2) digits. Note: The clock
is a 24-hour clock. Refer to the following table.
Step 4 Enter the “minutes code” which must be two (2) digits.
Example: 7 minutes after would be entered [0]–[7].
Time Hour Code
To Next Page
Loading...
Need help?
General
