Page 8 NX1448E Icon Keypad
GLOSSARY OF TERMS
Abort Delay An option that allows a delay in reporting to the
central station.
Authority Level The level of access an individual has when using
an alarm panel.
Central Station The location where alarm data is sent during an
alarm report.
Chime Feature An option that allows the keypad to sound a
ding-dong whenever an entry/exit door is
opened.
Codes Can be either User Codes (relating to a person)
or Function Codes (a toggle switch to turn
specific functions on/off). NOTE: A system may
have either 99 four-digit codes or 66 six-digit
codes, but not a mixture of the two.
Duress Code An option that allows a special code to be sent to
the central station that indicates the alarm
system is being operated under duress.
Forced Arming An option that allows the system to be turned on
(ARMED) with one or more zones open. A system
that is ready to be “force armed” will flash the
ready icon. (Note: Those zones that are not
ready will not create an alarm.)
Function Code A Function Code is either a four (4) or six (6)
digit code that has been programmed by the
installer to operate a device.
Group Bypass An option that allows the user to bypass multiple
zones with a single operation.
Instant/Delay An option that allows an instant alarm condition
for Entry/Exit doors, or grants a delay to allow
someone to enter/exit the building without an
alarm, or before entering a user code to disarm.
Master Code A master arm/disarm code that can program
other user codes.
To Next Page
Loading...
Need help?
General