GE SG Series User Manual

Critical Power
Modifications reserved
Page 2/46
GE_UPS_OPM_SGS_ISG_10K_40K_0US_V070.docx
Installation Guide SG Series 10-20-30-40 UL S
Model:
SG Series 10 - 20 - 30 - 40 UL S0
Issued by
Product Document Department – Riazzino - CH
Approved by:
R & D Department – Riazzino - CH
Date of issue:
11/20/2013
File name:
GE_UPS_OPM_SGS_ISG_10K_40K_0US_V070
Revision:
7.0
Identification No.:
1024195
Up-dating
Revision
Concerns
Date
2.0
Modified Section 3.8.4 & 5 – Power connection dual input utility
08/25/2004
3.0
House-style GE Consumer & Industrial
01/30/2006
4.0
ECN 1251: GE Digital Energy – Power Quality / Table DC current rating
11/12/2008
5.0
ECN 1348 – Soft 3.30 & DSP 10.0
12/15/2009
6.0
ECN1548 - Safety Rules
02/25/2011
7.0
ECN 2079 (EPO for RPA Parallel System)
Customer Interface Board / SNMP card & GE Critical Power template
11/20/2014
COPYRIGHT © 2014 by GE Consumer & Industrial SA
All rights reserved.
The information contained in this publication is intended solely for the purposes indicated.
The present publication and any other documentation supplied with the UPS system is not to be
reproduced, either in part or in its entirety, without the prior written consent of GE.
The illustrations and plans describing the equipment are intended as general reference only and are not
necessarily complete in every detail.
The content of this publication may be subject to modification without prior notice.

GE SG Series Specifications

General

Brand	GE
Model	SG Series
Category	UPS
Language	English