GE_UPS_USM_TLE_SUL_M16_M50_2bU_V010.docx
User Manual TLE Series 160 - 500 UL S2B
RPA
PARALLEL SYSTEM
(option)
The RPA PARALLEL SYSTEM is entered any
time the “RPA” key is pressed.
This screen is only displayed when the
RPA Parallel System is available (option).
The LCD screen
will provide some
information on the RPA Parallel System.
In this mode the keys perform the following functions:
Shows the main screen MEASURES.
See Section 6.2.
NOTE! During IEMi Operation Mode, the “Percent Load” information is computed
based on on-line units only.
Shows the main screen EVENTS.
See Section 6.3.
Shows the main screen SETUP.
See Section 6.4.
Shows the main screen COMMANDS.
See Section 6.5.
Key to reset general alarm and buzzer.
Shows the screen for the next RPA Parallel System units
Shows the screen of the previous RPA Parallel System units.
To Next Page
Loading...
Need help?
General