90
MAINTENANCE
Service Data
Fuel and Lubricant Chart
Use different fuels, lubricants and greases according to the temperature, referring to the
chart below.
¡Change the lubricant earlier than as shown in the table if it is extremely dirty or its
performance has deteriorated severely.
¡Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Part Type
Replacement
interval
Capacity
Lit. (US. qt.)
Type by temperature
-22 -4 14 32 50 68 86
104
°F
-30 -20 -10 0 10 20 30 40°C
Engine
oil pan
Diesel
engine oil
API-CD
After first 50
hrs.
Every 250 hrs.
Hydraulic
tank
Fuel tank
Engine
cooling
system
Travel
reduction
gear
Working
equipment
Diesel fuel
Coolant
(water**+
coolant***)
Gear oil
API-GL-4
Lithium
based
grease
EP-2
NLGI No.2
Every 1000 hrs.
Every 1000 hrs.
Daily or every
10 hrs.
When required
After first 500
hrs.*
Every 1000 hrs.
As required
SAE 90
Use a clean, Quality fuel for good performance and optimum engine life.
•To prevent fuel flow problems in cold weather, use diesel fuel with a pour point of
at least -12°C (10°F) below the lowest expected ambient temperature.
•Minimum cetane number is 45. Low temperature or high altitude operation may
require the use of fuel with a higher cetane number.
Diesel
engine oil
API-CD
Levers and
Pedal
CTL60:1.1(1.16)
CTL70:1.1(1.16)
CTL80:1.8(1.9)
CTL60:10.9(11.5)
CTL70:15(15.9)
CTL80:15(15.9)
CTL60:75
(19.8 US.gal.)
CTL70:90
(23.8 US.gal.)
CTL80:108
(28.5 US.gal.)
System
CTL60:60
(15.9 US.gal.)
CTL70:83
(21.9 US.gal.)
CTL80:95
(25.1 US.gal.)
Tank
CTL60:39
(10.2 US.gal.)
CTL70:52
(13.7 US.gal.)
CTL80:64
(16.9 US.gal.)
Upper limit
CTL60:10.2(10.8)
CTL70:9.6(10.1)
CTL80:14(14.8)
Lower limit
CTL60:5.7(6.0)
CTL70:7.6(8.0)
CTL80:7(7.4)
SAE 10W-30
SAE 5W-20
SAE 10W-30
SAE 15W-40
30% coolant mixture
50% coolant mixture
To Next Page
Loading...
Need help?
General
