EasyManuals Logo
Home>Gehl>Lifting Systems>RS8-44

Gehl RS8-44 User Manual

Gehl RS8-44
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
PRINTED IN U.S.A. 43 913218/CP0307
Hydraulic System Reservoir
Use Mobil DTE 15M, or an equivalent that
contains anti-rust, anti-foam and anti-oxida-
tion additives and conforms to ISO VG46.
Capacity:
47 Gallons (178 liters)
All Grease Fittings
Use No. 2 Lithium-based Grease
Engine Crankcase Oil
Ambient Temperature Grade*
-22°F - 86°F (-30°C - 30°C) SAE 5W-30
-4°F - 104°F (-20°C - 40°C) SAE 10W-40
5°F - 122°F (-15°C - 50°C) SAE 15W-40
*API Service Classification: CH-4/Cl-4
*API Service Classification for first 100 hours on new or
rebuilt John Deere engines: CC or CD
Capacity:
14 Quarts (13.3 liters)
Axle Gear Oil
MobilFluid
®
422/423 (recommended)
Super Tractor Oil Universal
API GL5 80W-90
or equivalent
Differential Capacity:
9.6 quarts (9.0 liters)
Planetary Capacity (each side):
0.6 quarts (0.5 liters)
Transmission Oil
Use Sunco Multi-ATF or equivalent
Capacity:
24 quarts (23.0 liters)
Brake System
Use Sunco Multi-ATF or equivalent
GENERAL INFORMATION
NOTE: The Maintenance chapter in this manual
has provisions for recording the dates and
hourmeter readings after lubrication or other ser-
vice has been performed; use those spaces to
keep a log for maintaining a current service inter-
val record. Proper routine lubrication is an impor-
tant factor in preventing excessive part wear and
early failure.
LUBRICANTS
The chart on this page lists the locations, temperature
ranges and recommended types of lubricants to be used
when servicing this machine. Also refer to the separate
engine manual for additional information regarding
recommended engine lubricants, quantities required
and grades.
NOTE: Refer to “Operator Services” in the
Service and Storage chapter of this manual for
detailed information regarding periodic checking
and replenishing of lubricants.
Chapter 7
LUBRICATION
WARNING
NEVER lubricate or service this unit when any
part of the machine is in motion. ALWAYS
exercise the MANDATORY SAFETY SHUT-
DOWN PROCEDURE (p, 8, SAFETY chapter)
before lubricating or servicing this equipment.
Courtesy of CraneMarket.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gehl RS8-44 and is the answer not in the manual?

Gehl RS8-44 Specifications

General IconGeneral
BrandGehl
ModelRS8-44
CategoryLifting Systems
LanguageEnglish

Related product manuals