GFI System Cabzeus User Manual

User Manual
CABZEUS
SpeakerSimulatorSystem
TableofContents
1. Overview 1 - 5
3. Application Ideas 8 - 10
4. Remote preset change 11
5. M I D I 12
6. Updating Firmware 12
7. Factory Presets 13 - 15
2 Using CabsLab software (brief guide) 6 - 7
Chapter 1 - OVERVIEW
Congratulation on your purchase of Cabzeus!
Cabzeus is a algorithm-based speaker - cabinet - miking simulator
system. Connected direct to your gears this device enables you to obtain
the sound of a miked-guitar amp cabinet without the hassle of miking your
cabinets. Extending this basic function, we’ve built into Cabzeus a pleth-
ora of unique and powerful features that goes beyond simple
speaker simulations.
1
2
Stereo I/O
Cabzeus has 2 independent channels, each with its own input, thru, and
output. With a special software that we provide you can freely customize
the whole simulation aspects (speaker type, cabinet type, mic placement,
etc.) of each channel independently. To help you get the most of your
stereo setup, we have also included powerful stereo processing functions
such as :
 adding short delays to one of the channel.
 blending two simulation channels.
 independent volume and phase control.
Presets
When you’ve found your favorite settings you can save them as presets
in Cabzeus. The presets (8 of them) can then be called using the preset
selector knob, an external switchbox, or a MIDI controller.
Preset1‐4:LEDturnsGreen
Preset5‐8:LEDturnsRed
Bypass:LEDturnsoff.
PresetLEDs
Presetselectorknob

GFI System Cabzeus Specifications

General

Brand	GFI System
Model	Cabzeus
Category	Speaker System
Language	English