GFI System Cabzeus User Manual

Reading stored preset from Cabzeus
(1) Choose the desired preset location
(2) Click ‘Read’
‘Solo’ Function
One very useful feature that you will find yourself using a lot is the ‘Solo’
function. When using the Stereo Cabs mode, you have the luxury to
specify different speaker for the Left and the Right channel. But, often in
the process of searching for a great sounding speaker pair, you would
like to be able to audition only a single speaker in isolation. There are
many ways to accomplish this, but the easiest method is to use the Solo
function.
Activating the Solo function forces both the Left and Right simulators to
use the same speaker selection & cabinet type, as were set on the simu-
lator side whose Solo function you’ve just activated. All the other controls
are still independent.
Click on the Left speaker icon to acti-
vate/deactivate the Left Solo function.
Click on the Right speaker icon to acti-
vate/deactivate the Right Solo function.
Tips : When the Left Solo function is active, activating the Right Solo
function automatically disengage the Left Solo function. This behavior is
very useful for doing A/B comparison when auditioning the many speaker
types!
7
8
Chapter 3 - Application Ideas
1. Typical Live / Studio application using an amp as sound source.
Stompboxes or other effects processors may be put in place of the amp, in which case the speaker cabinet / load box should be disconnected, or replaced with an amp.
Alternatively you may also use the PREAMP OUT (Send) instead, in which case the speaker cabinet / load box should be disconnected.

GFI System Cabzeus Specifications

General

Brand	GFI System
Model	Cabzeus
Category	Speaker System
Language	English