GFI System Cabzeus User Manual

User Manual
CABZEUS
SpeakerSimulatorSystem
TableofContents
1. Overview 1 - 5
3. Application Ideas 8 - 10
4. Remote preset change 11
5. M I D I 12
6. Updating Firmware 12
7. Factory Presets 13 - 15
2 Using CabsLab software (brief guide) 6 - 7
Chapter 1 - OVERVIEW
Congratulation on your purchase of Cabzeus!
Cabzeus is a algorithm-based speaker - cabinet - miking simulator
system. Connected direct to your gears this device enables you to obtain
the sound of a miked-guitar amp cabinet without the hassle of miking your
cabinets. Extending this basic function, we’ve built into Cabzeus a pleth-
ora of unique and powerful features that goes beyond simple
speaker simulations.
1
2
Stereo I/O
Cabzeus has 2 independent channels, each with its own input, thru, and
output. With a special software that we provide you can freely customize
the whole simulation aspects (speaker type, cabinet type, mic placement,
etc.) of each channel independently. To help you get the most of your
stereo setup, we have also included powerful stereo processing functions
such as :
 adding short delays to one of the channel.
 blending two simulation channels.
 independent volume and phase control.
Presets
When you’ve found your favorite settings you can save them as presets
in Cabzeus. The presets (8 of them) can then be called using the preset
selector knob, an external switchbox, or a MIDI controller.
Preset1‐4:LEDturnsGreen
Preset5‐8:LEDturnsRed
Bypass:LEDturnsoff.
PresetLEDs
Presetselectorknob

GFI System Cabzeus Specifications

General

Technology	Digital
Power	9V DC
Speaker Simulation	Yes
Inputs	1 x 1/4"
Outputs	1 x XLR
EQ Controls	Bass, Mid, Treble
Power Supply	9V DC power adapter

Summary

Chapter 1 OVERVIEW

Stereo I/O

Dual independent channels with customizable simulation and stereo processing functions.

Presets

Allows saving and recalling favorite settings via knob, switchbox, or MIDI controller.

Headphone Out

Stereo headphone output with dedicated volume control for silent practice.

Mic Position Knobs

Two knobs adjust mic position parameters for tone control without computer access.

Input Connections

Details input sources, Thru output purpose, and Input Pad attenuation switches.

Output Connections

Explains the two outputs supporting balanced/unbalanced modes via TRS or XLR connections.

Chapter 2 - Using CabsLab software (brief guide)

Saving algorithms as preset into Cabzeus

Details the process of saving customized algorithms to the pedal as presets.

Chapter 3 - Application Ideas

1. Typical Live / Studio application using an amp as sound source.

Illustrates connecting an amp to Cabzeus for live/studio use, with optional PREAMP OUT usage.

2. Intergrating Electric and Acoustic setup.

Guides on using stereo CABS mode for blending electric and acoustic guitar sounds.

3. Practicing to accompaniment music

Describes setting up for practicing with accompaniment music using headphones.

Chapter 4 - Remote Preset Change

1. Using MIDI Controller.

Explains how to change presets remotely using a MIDI controller via Program Change messages.

2. Using External Switch.

Details the method for remote preset change using a momentary, normally-open external switch.

Chapter 5 - MIDI

MIDI Implementation Chart

Provides a chart showing MIDI Program Change (PC) numbers for presets and bypass.

MIDI Channel

Explains how to configure the MIDI channel used by the Cabzeus.

Chapter 6 - Updating Firmware

Chapter 7 - Factory Presets

Specifications

Key Features