- 24 -
Monitor User’s Manual
OPERATIONS
Note: You can either use the Control button or the Navigation/Enter buttons
on the remote control to navigate through the menu and make adjustments.
Quick Menu
Hot Key
By default, the
Control button has been assigned with the specic
function.
Note: To change the preset hot key function, refer to the “Quick Switch” section
on page 37.
To access the hot key function, do the following:
•Move the Control button up ( ) to enter the Black Equalizer
menu.
Move the
Control button
up/down ( ) to adjust
the setting and press the
Control button to conrm.
Adjust Exit
Black Equalizer
10