- 33 -
2-8 PnP/PCICongurations
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
PnP/PCICongurations
PCI1 IRQ Assignment [Auto]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
2-9 PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
PC Health Status
Hardware Thermal Control [Enabled]
Reset Case Open Status [Disabled]
Case Opened No
Vcore 1.308V
DDR3 1.5V 1.500V
+12V 11.880V
+3.3V 3.497V
Current System Temperature 34
o
C
Current CPU Temperature 36
o
C
Current CPU FAN Speed 3183 RPM
Current SYSTEM FAN Speed 0 RPM
CPU Warning Temperature [Disabled]
CPU FAN Fail Warning [Disabled]
SYSTEM FAN Fail Warning [Disabled]
CPU Smart FAN Control [Enabled]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
PCI1 IRQ Assignment
Auto BIOSauto-assignsIRQtotherstPCIslot.(Default)
3,4,5,7,9,10,11,12,14,15 AssignsIRQ3,4,5,7,9,10,11,12,14,15totherstPCIslot.
Hardware Thermal Control
Enables or disables the CPU overheating protection function. When enabled, the CPU core voltage and
ratio will be reduced when the CPU is overheated. (Default: Enabled)
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous
chassis intrusion status and the Case Openedeldwillshow"No"atnextboot.(Default:Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
Current Voltage(V) Vcore/DDR3 1.5V/+12V/+3.3V
Displays the current system voltages.