- 63 - BIOS Setup
2-15 Security Chip Configuration
(Note)
Security Chip
Enables or disables the security chip. It is recommended that you use this function with the
Supervisor/User password.
Enabled Enables the security chip.
Enabled/Activate Enables the security chip and initializes the Security Platform.
Disabled Disables the security chip. (Default)
Clear Security Chip
This item allows you to clear all settings in the security chip.
Press <Enter> to enter the setup screen:
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Security Chip Configuration
Security Chip [Disabled]
x Clear Security Chip Enter
Security Chip State Disabled/Deactivated
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
Setup Warning
User Information in Security Chip is cleared!
Are you sure you want to clear it?
[YES] [NO]
To clear the settings in the security chip, press
<Enter> on [YES].
Setup Confirmation
Need reboot to clear Security Chip.
Save configuration changes and reboot now?
[YES] [NO]
Confirm again.
If you are sure to clear the settings, press <Enter>
on [YES] again, then the system will reboot and
clear the settings.
Security Chip State
Displays the current settings in the security chip.
Only for GA-EP45-DS3R.
(Note) This feature is optional due to different regional policy.
To Next Page
Loading...
Need help?
General
