- 43 - BIOS Setup
English
2-5 Integrated Peripherals
SATA RAID/AHCI Mode (Intel ICH9R Southbridge)
Enables or disables RAID for the SATA controllers integrated in the Intel ICH9R Southbridge or
configures the SATA controllers to AHCI mode.
Disabled Disables RAID for the SATA controllers and configures the SATA controllers to
PATA mode. (Default)
RAID Enables RAID for the SATA controllers.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing and
hot plug.
SATA AHCI Mode (Intel ICH9 Southbridge)
Configures the SATA controllers integrated in the Intel ICH9 Southbridge to AHCI mode.
Disabled Disables AHCI for the SATA controllers and configures the SATA controllers to
PATA mode. (Default)
AHCI
(Note)
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
SATA RAID/AHCI Mode 1 [Disabled]
SATA AHCI Mode 23 [Disabled]
SATA Port0~3 Native Mode 1 [Disabled]
SATA Port0~1 Native Mode 23 [Disabled]
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Legacy USB storage detect [Enabled]
Azalia Codec [Auto]
Onboard H/W LAN [Enabled]
` SMART LAN [Press Enter]
Onboard LAN Boot ROM [Disabled]
Onboard SATA/IDE Device [Enabled]
Onboard SATA/IDE Ctrl Mode [IDE]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
Only for GA-P35-DS3R.
Only for GA-P35-DS3.
Only for GA-P35-S3.
(Note) Supported on Windows
®
Vista
®
operating system only.