EasyManuals Logo

Gigabyte GA-P55A-UD6 User Manual

Gigabyte GA-P55A-UD6
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
- 57 - BIOS Setup
ACPI Suspend Type
Species the ACPI sleep state when the system enters suspend.
S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state.
In S1 sleep state, the system appears suspended and stays in a low power mode.
The system can be resumed at any time.
S3(STR) Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state (default).
In S3 sleep state, the system appears to be off and consumes less power than in
the S1 state. When signaled by a wake-up device or event, the system resumes to
its working state exactly where it was left off.
ACPI LED Control
Enables or disables the onboard ACPI LEDs. Enabled allows the onboard ACPI LEDs to light up accord-
ing to the system status. (Default: Enabled)
Soft-Off by PWR-BTTN
Congures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
PME Event Wake Up
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a PCI or PCIe de-
vice. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
(Default: Enabled)
Power On by Ring
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a modem that
supports wake-up function. (Default: Enabled)
(Note) Supported on Windows 7/Vista operating system only.
2-7 Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Power Management Setup
ACPI Suspend Type [S3(STR)]
ACPI LED Control [Enabled]
Soft-Off by PWR-BTTN [Instant-Off]
PME Event Wake Up [Enabled]
Power On by Ring [Enabled]
Resume by Alarm [Disabled]
x Date (of Month) Alarm Everyday
x Time (hh:mm:ss) Alarm 0 : 0 : 0
HPET Support
(Note)
[Enabled]
HPET Mode
(Note)
[32-bit mode]
Power On By Mouse [Disabled]
Power On By Keyboard [Disabled]
x KB Power ON Password Enter
AC Back Function [Soft-Off]
EuP Support [Disabled]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level


Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gigabyte GA-P55A-UD6 and is the answer not in the manual?

Gigabyte GA-P55A-UD6 Specifications

General IconGeneral
Memory voltage1.5 V
Number of memory slots6
Maximum internal memory16 GB
Processor socketLGA 1156 (Socket H)
Processor manufacturerIntel
USB 2.0 connectors2
Power fan connectorYes
Number of SATA connectors8
AGP x8 slots0
Special features@BIOS Q-Flash Xpress BIOS Rescue Download Center Xpress Install Xpress Recovery2
Controller interface typeiTE IT8720
Controller 2nd interface typeATA-133/100/66/33
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio chipRealtek ALC889
Motherboard chipsetIntel® P55
Audio output channels7.1 channels
Motherboard form factorATX
Compatible operating systemsWin XP, Vista, 7
PCI Express x16 slots3
RAID levels0, 1, 10
Bundled softwareNorton Internet Security
Networking features10/100/1000 Mbit
BIOS memory size32 Mbit
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width305 mm

Related product manuals