Using the card 56
Code 429159
Rev. 15/0717
9.3. Consulting the card and changing the program name
It permits consulting the content of the card.
If a program is selected, its identifying name can be modified.
Access the viewing content of the card submenu. The list of programs stored on the
card will appear.
If you want to modify the program name, select it.
Validate the selection by pressing the key from the multi-function keyboard.
The modifying the name screen will appear.
Proceed on this screen according to section 7.2. Confirm the modification. The program
has been saved on the card with the new name.
The machine is ready again to select a new program on the card.
To quit the option, access the upper menu by pressing the key.
9.4. Erasing a program on the card
It allows erasing a selected program on the card, after having selected it.
Access the erasing a program from the card submenu.
The list of programs stored on the card will appear.
Select the program you want to erase. Validate the selection by pressing the
key from the multi-function keyboard.
The following screen prompts confirmation to erase.
Confirm to erase the program contents.
The machine is ready again to erase a new program.
To quit the option, access the upper menu by pressing the key.
To Next Page
Need help?
General
