GIRBAU EM055 - Interpretation of the Program Tables: Symbols and Values

Cod. 429266
Rev. 03/0209
Operation
16
2.6.2. Interpretation of the program tables: symbols and values
SYMBOL OPTION DESCRIPTION

ΤΤ
Estimated program time
Minimum program time based on a machine with hot water supply and without
heating. Time in minutes.
Ph
Τ
Phase number
The phase indicated with grey background belongs to the wash phase.
L
1
2
3
Bath level
Low level
Medium level
High level (units with pumped drain, levels 2 and 3 are the same)
C / F
ΤΤΤ
Bath temperature
Value in Centigrade or Fahrenheit degrees
d
0
1
2
3
4
Dosing
Phase without dosing
Pre-wash dosing
Wash dosing
Bleach dosing
Softener / neutraliser dosing
r
1
2
3
Drum rotation
Heavy-duty rotation: 25 sec. ON / 5 seconds stop.
Normal rotation: 15 sec. ON / 15 seconds stop.
Delicate rotation: 5 sec. ON / 25 seconds stop.
rt
ΤΤ
Rotation time
Value in minutes
c
0
1
Gradual cool down
Option non available
Option available
rh
0
1
Program stop in the last rinse (rinse hold)
Option non available
Option available
E
1
2
4
6
Bath drain
Drain + wash speed
Drain + positioning speed
Drain + medium spin speed
Drain + high spin speed
Et
ΤΤ
- - - -
Spin time
Value in minutes
Non programmable value in the phase