Glacier bay FP4A0052BNV User Manual

Without deck plate
With deck plate
1-1/2 in. (38 mm) Max Deck Thickness.
Ø 1-3/8 in. (35 mm) Min.
Ø 1-1/2 in. (38 mm) Max.
1 in. (25 mm) Max Deck Thickness.
Ø 1-3/8 in. (35 mm) Min.
Ø 1-1/2 in. (38 mm) Max.
8
in.
Installing the faucet with the
deck plate
Place a bead of clear silicone sealant (not included)
around the base of the gasket (E). Place the gasket
(E) and the deck plate (D) on the sink.
Rotate the two half-moon locking nuts (2) inward
before inserting the base (I) into the sink.
Insert the base (I) into the sink.
Check for the proper thickness of the sink.
Installation
2.b
2.a
Installing the faucet assembly
1
I
D
E
(2)
Rotate the two half-moon locking nuts (2) inward
before inserting the base (I) into the sink.
Shut off the water supply. Remove the old
faucet.
Clean the mounting surface.
Installing the faucet without
the deck plate
Insert the base (I) into the sink.
(2)
I
4

Glacier bay FP4A0052BNV Specifications

General

Brand	Glacier bay
Model	FP4A0052BNV
Category	Kitchen & Bath Fixtures
Language	English