Glacier bay FP4A0052BNV User Manual

1 2 3 4
Cleaning The Filter Screen
1. Detach the pull-out spray (B) from the pull-out spray hose (J). Hold the pull-out spray hose (J) rm to prevent
it from retracting into the faucet body (A).
2. Flush the lter screen with water.
3. Reattach the pull-out spray (B) to the pull-out spray hose (J).
4. Turn water on to ensure water ow is no longer obstructed.
CAUTION: Debris in the lter screen may result in
irregular or low water ow. Follow these steps to clean the
lter screen located in the pull-out spray (B).
J
A
B
B
B
J
Checking for leaks
Detach the pull-out spray (B) from the pull-out spray
hose (J). Hold the pull-out spray hose (J) rm to pre-
vent it from retracting into the faucet body (A).
Ensure the handle is in the off position. Turn the hot
and cold water supplies on and check all connections
for leaks. If leaks are discovered, check the connec-
tions to ensure they are tight and properly secured.
Lift the handle to allow the water to run for approxi-
mately one minute. This ushes away any debris that
could damage the internal parts.
Turn the water off and reattach the pull-out spray (B).
2
B
J
Operation (continued)
J
A
A
8

Glacier bay FP4A0052BNV Specifications

General

Brand	Glacier bay
Model	FP4A0052BNV
Category	Kitchen & Bath Fixtures
Language	English