Global JUNO-NET User Manual

To disable the fire brigade transmission press the FIRE
BRIGADE TRANSMISSION .
The illuminates
AMBER.
The STATUS - DISABLED illuminates AMBER.
Re-press the to
re-enable the transmission.
button
LED
LED
button
FIRE BRIGADE TRANSMISSION
The QUEUE REVIEW-DISABLED LED illuminates AMBER.
FIRE BRIGADE TRANSMISSION
STATUS
STATUS
FIRE ALARM SYSTEM
FIRE ALARM SYSTEM
FIRE
FIRE
FAULT
FAULT
PRE-ALARM
PRE-ALARM
TEST
TEST
DISABLED
DISABLED
SYSTEM ON
SYSTEM ON
ALARM FAULT
ALARM FAULT
SUPPLY FAULT
SUPPLY FAULT
PROC. FAULT
PROC. FAULT
TRANS. FAULT
TRANS. FAULT
SOUND ALARMS
SOUND ALARMS
PAPER FEED
PAPER FEED
LAMP TEST
LAMP TEST
SYSTEM RESET
SYSTEM RESET
ALARM SILENCE
ALARM SILENCE
DISABLED
DISABLED
TEST
TEST
FAULT
FAULT
FIRE
FIRE
AUXILIARY
RELAYS
AUXILIARY
RELAYS
FIRE BRIGADE
TRANSMISSION
FIRE BRIGADE
TRANSMISSION
SELECTED
DETECTORS
SELECTED
DETECTORS
ACTIVE
DELAYS
ACTIVE
DELAYS
FIRE BRIGADE
ACKNOWLEDGED
FIRE BRIGADE
ACKNOWLEDGED
ALARM DISPLAY
ALARM DISPLAY
JUNO-NET
JUNO-NET
MANUFACTURED TO THE
REQUIREMENTS OF
EN54 Pt 2 & Pt 4 1999
MANUFACTURED TO THE
REQUIREMENTS OF
EN54 Pt 2 & Pt 4 1999
FAULTS
FAULTS
CONTROLS
CONTROLS
DISABLEMENTS
DISABLEMENTS
QUEUE REVIEW
QUEUE REVIEW
1
1
2
2
3
3
4
4
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
21
21
23
22
22
20
20
24
24
27
27
26
26
29
29
30
30
32
32
33
33
31
31
28
28
34
34
35
35
LCD DISPLAY
LCD DISPLAY
To disable the relay and I/O module outputs press the
AUXILIARY RELAYS .
The AUXILIARY RELAYS illuminates AMBER.
The STATUS - DISABLED illuminates AMBER.
Re-press the AUXILIARY RELAYS button to re-enable the
relays and I/O modules.
button
LED
LED
The QUEUE REVIEW-DISABLED illuminates AMBER.LED
AUXILIARY
RELAYS
FIRE BRIGADE
TRANSMISSION
OPERATION JUNO-NET
1.10 DISABLEMENTS (continued...)
1.10.2 AUXILIARY RELAYS
1.10.3 FIRE BRIGADE TRANSMISSION
The AUXILIARY RELAYS DISABLEMENT button enables and disables all relay and I/O module outputs. This
means that those outputs will remain unchanged if a fire or fault occurs. The outputs that are controlled by
this button include the normally energised FAULT relay, the FAULT I/O group, the EVAC relay as well as the
I/O modules fitted to the analogue loops and, of course, the auxiliary relays.
13
OPERATION & MAINTENANCE MANUAL
REVISION 0.7a
16-04-2004

Global JUNO-NET Specifications

General

Brand	Global
Model	JUNO-NET
Category	Fire Alarms
Language	English