Glow-worm Climapro2 RF Installation

0020094586_01-08/10-Glow-worm
- 7 -
INSTALLATION
 
Case n°1 - radio receiver on control box unit
1
2

 
 
• Slidetheradioreceiverintothenotches.
1
2

 
 
Case n°2 - radio receiver in the control box unit
A
B
1
2

 
 
The receiver should be installed outside the
appliance if the appliance control box does not have
a location for the radio receiver.
Case n°3 - radio receiver outside appliance
• Determinetheinstallationlocation.Seethe"Installation
location"chapter.
A
B
5
4
3
2
1

 
 
 
 
 
• Positiontheradioreceiver(1)onawall.
• Drillthehole(5)forthexingscrewinaccordancewiththe
xinghole(3)ontheunitorusethestickypadifprovided.
• Inserttherawlplug(4)inthedrilledhole(5).
• Fixtheradioreceiverwiththexingscrew(2).
• Respectthestandardsforelectricalinstallationsinforcefor
connectingtheebuscablebetweentheradioreceiverand
theappliance.

Glow-worm Climapro2 RF Specifications

General

Brand	Glow-worm
Model	Climapro2 RF
Category	Thermostat
Language	English