9 Introduction
1.4 Conditional Access
Amongst the channels that are scanned via XPEED LX2, some channels can be properly tuned
in only with the corresponding Smartcard. XPEED LX2 provides two Smartcard Reader slots
and users need to purchase those Smartcards that are required for viewing such subscription
based services.
Insertion of Smartcard
① Open the door on the right side.
② Insert Smartcard as in the following instruction.
③ Make sure that the Smartcard remain inserted while viewing.
Insertion of CAM (Conditional Access Module)
There are several Conditional Access Systems (CAS) that XPEED LX2 supports. To be able to
watch channels that are encrypted in such CAS as Nagravision, NDS, Irdeto, Viaccess, etc,
users need to purchase a CAM that is corresponding to each CAS, as well as Smartcard to
decrypt those encrypted channels.
① Insert a Smartcard into the CAM as in the below picture.
② Once the Smartcard inserted into the CAM, insert the CAM into the CI slot.
③ Make sure that the CAM remains inserted while viewing.
To Next Page
Loading...
Need help?
General
