6
MAIN MENU
ART 4/G2+MONITOR
If the device is in standby (screen switched off), to access the main menu, press any of the buttons of the monitor.
Then press the button located just below the corresponding icon. The device will return to standby mode after 0
seconds without activity.
2
Press the button below icon to display the image from the door panel. Note: This enables
the door panel camera to be changed, the audio on the corresponding door panel to be activated
and the door to be opened (see p. ).
master
15
Press the button below icon to access the menu of the intercom between other monitors in the
same apartment or other apartments (see p. ).20 to 21
Press the button below icon to display the list of images recorded in the memory of the device. If
a MicroSD card is inserted in the monitor, images/videos will be recorded on the MicroSD card
(see p 1 and 2 2 ).ages 2, 13 to 14 2 to 4
Indicates that the inserted MicroSD card must be formatted from the monitor. Access this
function by pressing the button below icon to access the MicroSD card formatting menu,
then press the button below icon to start formatting the MicroSD card. To exit without
formatting, press the button below icon .
There are no images/videos pending viewing.
There are images/videos pending viewing.
Press the button below icon to make changes to the system settings (see pp. .7 to 12
Press the button below icon to enable disable the 'Do
not disturb' function: If the monitor is in 'Do not disturb' mode, the status LED will
illuminate (red) and the ringtone on the monitor will not sound when a call
for 3 seconds and for 1 second to
( “HZ”
p g 5)
see note
a e is received.
To 9 to 10set a period of time for 'Do not disturb' mode (see p. ).
!
09:27PM
17 10 9- -201
Main menu
Disabled Enabled
To Next Page
Loading...
Need help?
General
