Gorenje GV63214 User Manual

Overflow .
Whe n some malfunctions c o me on, the appliance will displ ay error code s to warn you:
Longer inlet time.
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
S ome element of dishwasher leaks .
E1
E4
The dishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme .
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearrange the items so that the sp ay can rotate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleani ng the Spray
Arms".
r
Use less detergent if you have soft water and se lect
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to elim inate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishe s are barel y warm to the touch. Empty the low
bas ket fir st. This prevents water form dropping off
dishes i n the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is more difficu lt with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerf ul enough.
Not enough detergent
was dispensed.
Item s are blocking
the path of sp ay arms.r
The filter combination
inthebaseofwash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets
to get blocked.
r
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dis hes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coa ting
If o verflow occu rs, turn off th e main water supply before calling a service.
If th ere is water in the base pan because of an overfill or small leak,
the water should be remove d before restarting the di shwasher .

Gorenje GV63214 Specifications

General

Door color	Not applicable
Tub material	Stainless steel
Appliance placement	Fully built-in
Control panel color	Black, Grey
Built-in water softener	Yes
Cycle time	170 min
Noise level	49 dB
Delay start (max)	24 h
Dishwashing programs	Eco, Quick
Number of place settings	14 place settings
Number of washing programs	6
Number of temperature settings	4
Drying class	A
Feet adjustment	600 mm
AC input voltage	230 V
Water consumption per cycle	12 L
Energy consumption per cycle	1.04 kWh
Package depth	635 mm
Package width	630 mm
Package height	889 mm

Weight and Dimensions

Depth	5570 mm
Width	598 mm
Height	818 mm
Installation compartment depth	580 mm
Installation compartment height	820 mm