hunting of SIP extensions or IP address with port or mixing of both, with each ring several seconds
before going next. [Number Called When Door Bell Pressed]
• Added feature to capture snapshot when doorbell pressed. [Snapshot when Doorbell Pressed]
• Added feature to disable keypad input (lock keypad) and ONLY doorbell button can be pressed.
[Disable Keypad (except the Doorbell Button)]
• Added option to disconnect call automatically after door open event. [Enable On Hook After Remote
Door Opened]
• Issuing Mode automatically. [Card issuing State Expire Time(m)]
• Added ability for whitelist entries to open door using remote PIN. [Account [1-4] White List]
Firmware Version 1.0.2.25
• Added if schedule disabled, GDS3710 will bypass the option to open door. [Group overrides
Schedule]
• Implemented the HTTP Upload (RFID card) Log Event support for 3
rd
party Software Integration.
[Event Notification]
Firmware Version 1.0.2.22
• No major changes.
Firmware Version 1.0.2.21
• Allow config and call IP address format on SIP field when dialing the Virtual Number. [SIP Number]
• Added “Silent Alarm” Mode. [Enable Silent Alarm Mode]
• Added option Backup/Restore including all passwords like SIP/FTP/Remote Access, etc. [Data
Maintenance]
• Added schedule support for Card and PIN. [Schedule]
• Added LLDP support. [Enable LLDP]
• Added database automatic backup and synchronization.
• Modified WebGUI style.
• Added card information batch delete option in the WebGUI. [Users Operation]
• Added option to enable “Motion Detection”, “Tamper Alarm” and backlight partially light. [Tamper
Alarm] [Motion Detection] [Enable Background Light]
• Added card user limitation up to 2000 and group limit to 50. [Card Management] [Group]
• Added Card and PIN schedule configuration Central Mode. [Central Mode]
• Added LDC Ratio Control and Adjustment. [LDC Ratio]
• Expended the range of Ring timeout. [Ring Timeout]
• Added option to disable Auto Answer. [Auto Answer]
• Updated the “DingDong” tone when doorbell pressed.
• Added function to check the default value.
• Added Factory Reset via special procedures. [Hard Factory Reset]
• Added file upload and download (card information, configuration etc.) can be executed after