GDS3710 User Manual
Version 1.0.7.8
For more details and conditions, refer to [Disable Keypad SIP
Number Dialing].
• Unified PIN: Means all members share a same PIN to unlock the
door. Users need to enter the following sequence from the GDS3710
keypad to open the door [*Local PIN to Open the Door#].
• Card & Private PIN: Means every member needs to swipe his card
and enter his private PIN to open the door using the following
sequence [Swipe the card + * Private PIN#]
Local PIN to Open the
Door
Configures PIN stored in GDS3710, input locally this PIN on the GDS3710
keypad will unlock the door.
This feature needs Private PIN, means every member has a private PIN,
the GDS will record who unlocked the door every time.
Users need to enter the following sequence from the GDS3710 to open
the door [*Virtual Number*Private PIN#].
Note: When local PIN type is set to private card PIN, users can also open
the door by swiping their cards.
Local PIN to Open Door
Schedule
Configure a schedule for the Local PIN to open the door. Once configured,
the door opening ability using local PIN with turn ON/OFF based on
configured schedule. Default setting is “All Day”.
When enabled, remote SIP phones can open the door while in call by
entering the remote PIN code configured (the PIN code is sent via DTMF).
Default settings is disabled.
Enables password entry for guests.
Configures the password that will be used by guests.
Selects the start time when the Guest PIN start to take effect.
Selects the end time when the Guest PIN will stop working.
If checked, GDS3710 will not answer incoming calls automatically, users
can press any key to answer the call. Default setting in unchecked.
Enable Doorbell Button to
Hang up Call
If checked, Users can hang up an active call when pressing the doorbell
button. Enabled by default.
Disable Keypad (except
the Doorbell Button)
When checked the Keypad will be disabled, only Door Bell button can be
pressed.
To Next Page
Loading...
Need help?
General
