Web Access
Mode
Selects the access mode to the web GUI either HTTP or HTTPS.
Web Access
Port
Specifies the TCP port for Web Access, default 443.
User Login
Timeout(min)
If no action is made within this time the GDS3705 will logout from the Web GUI, range is between 3 and
60.
Maximum
Number of
Login
Attempts
Specifies the allowed login times error limit, if the unsuccessful login attempts exceed this value, the
GDS3705 webGUI will be locked for the time specified in Locking Time of Login Error.
Locking Time
of Login Error
(m)
Specifies how long the GDS370x is locked before a new login attempt is allowed.
Disable Web
Access
Allow or deny the web access to the GDS370x. (HTTP API do not take effect when this option is enabled).
Note: If both Web UI and SSH are disabled, GDS3705 will get blocked and not be able to be accessed.
Only two ways to get it back:
1. Re-provisioned by ITSP or Service Provider (by adjusting the related parameters)
2. Hard Reset (GDS3705 has to be offline and uninstalled to perform this hard reset).
Disable CFG
download
with password
Sets a password in order to disable CFG download
Enable UPnP
Discovery
UPnP (or mDNS) function for local discovery. Default setting is enabled.
Enable
PIN/Password
Display
(HTTPs)
Once enabled, there will be an “eye” icon displayed in the web UI, putting the cursor to the “eye” icon,
the related password or PIN will be displayed at the web UI. Once mouse cursor moved away, the
PIN/Password will be displayed as dot “.” as usual.
Note: This feature ONLY works in HTTPS mode. Due to the insecurity of HTTP, PIN/Password will NOT be
displayed. PIN/Password can ONLY be displayed in HTTPS mode.
Enable SSH Selects to Enable/Disable SSH access. Default setting is enabled.
To Next Page
Loading...
Need help?
General
