GS Search – Resetting the device
Restore to Factory Default Via SIP NOTIFY
1. Access your GDS370x UI by entering its IP address in your favorite browser.
2. Go to the Phone Settings # page.
3. Enable “Allow Reset Via SIP NOTIFY” by checking this option. (Default is disabled)
4. Once a SIP NOTIFY with “event: reset” is received, the GDS370x will perform factory reset after authentication phase.
The authentication can be done either using an admin password (if no SIP account is configured) or via SIP account
credentials (SIP User ID and Password).
Reset Factory Password Via Special Key Combination Operation
This feature allows customers to reset the device administrator password to factory default via keypad operation through
some special key combination. When performing this operation, ONLY the password will be reset back to factory default. All
other settings or parameters will NOT be changed and will remain the same. This feature is specially designed for field
engineers or technicians when dispatched in the field but for some reason, the administrator password is not available
therefore not able to access the GDS37xx device to do the related maintenance.
Here are the steps to do such a password reset operation via keypad:
Note
Received SIP NOTIFY will be first challenged for authentication purpose before taking factory reset action.
Note
This configuration is exclusive to the GDS3705 Model.
To Next Page
Loading...
Need help?
General
