EN - 26
See Figure 35.
6. Loosen lock nut on height-adjustment
bolt.
7. Turn bolt in or out until levers are at the
same height.
8. Tighten lock nut.
Adjust Steering Level Reach
See Figure 36.
1. Loosen hardware securing steering lever
to upper control arm.
2. Pivot steering lever to desired position.
3. Ensure levers are aligned with each
other.
4. Tighten hardware.
Figure 35
1. Lock Nut
2. Height-adjuster Bolt
1
2
Figure 36
1. Steering Lever
2. Upper Control Arm
3. Hardware
1
3
2
To Next Page
Loading...
Need help?
General
